Panasonic microwave error codes

Is your microwave displaying an error code? No need to call a service technician right away. First try cycling the power. Unplug the home appliance or cycle the circuit breaker for about a minute, then restore power.
If this does not help, check out the list of Panasonic inverter microwave problems below and try the solutions it offers. Chances are that this will be enough to fix the oven.

Panasonic NE series microwave error codes

There are more than 10 models in the Panasonic NE series range. All of them are compact microwaves constructed from durable stainless steel.
Many of the NE microwaves are designed for commercial use and are NSF- and UL-rated “Commercial”. The Panasonic NE range currently includes microwave ovens with such options as programmable memory pads, sonic steamer, and SD programming.

CODEPROBLEMWHAT TO DO
F01Too high temperature of exhausted airThe oven shuts off automatically. Disconnect the power cord from the wall socket. The oven beeps continuously and resets for operation when cool. Move the oven to the cooler location. If the problem persists, call service agent.
F03Incoming line voltage too high.Check line voltage and that voltage adjustment is matched. (Refer to page 5 for Power Source Voltage Adjustment.)
F04Incoming line voltage too low.If the line voltage is other than 208 or 230 - 240 V, consult electrician to check outlet.
F05Defective memory ICIf the problem persists, call service agent. The oven will operate even if Failure Code appears, just not as designed. Call service agent. If the problem occurs during memory heating, press Stop/Reset pad. Then other memory program and manual heating will be possible
F33-34Defective thermistor circuitThe oven shuts off automatically. If the problem persists, call service agent.
F44Defective control panelThe oven shuts off automatically. If the problem persists, call service agent.
F81-82Defective relay circuitIf the problem persists, call service agent. The oven will operate even if Failure Code appears, just not as designed. Call service agent. Press Stop/Reset pad and try again.
F86-87Defective relay circuitThe oven shuts off automatically. If the problem persists, call service agent.

Panasonic NE-1024F microwave error codes

Panasonic NE-1024F is a microwave from the commercial range. It has passed all the necessary tests and meets the requirements for commercial electrical appliances.
The oven made of stainless steel is designed for use under heavy conditions. Unfortunately for those who liked Panasonic NE-1024F, the company remodeled it, and now it is almost impossible to buy.

CODECAUSEWHAT TO DO
F01 Overcooked tood Temperature of exhaust air too highPress STOP/RESET Pad to stop beep.
Unplug oven and wait al least 30 minutes before reconnecting.
Wait for oven to cool down and reset.
If a flame is present, do nol open oven door.
If normal operation does not resume, call the service aoent with intormation of failure code
F33-34 Detective sensor circuitUnplug the oven and wait more than 10 seconds betore reconnecting.
F44When a pad was pressed for more than 30 seconds Defective pad or control circuitIf normal operation does not resume, call the service agent with the intormation oftailure code.