Dyson vacuum troubleshooting

Dyson vacuum cleaner is your irreplaceable assistant in constant struggle for cleanliness. The troubleshooting system responds for the good condition of Dayson vacuum cleaner itself. This system is presented below in form of a simple table.

ProblemsCauseSolutions
Sudden loss of suction powerBlockage in hoseLook through the clear walls of the extension hose assembly for any blockages. If there are, take off any attachments and shake lose the blockage. Your vacuum should now operate as normal.
Blockage in brush headTurn the vacuum over so that the brush head assembly is upright. Look for any obstructions, and remove them. Your vacuum should now operate as normal.
Blockage in internal hoseTurn the vacuum over so that the brush head assemble is upright. Look for any blockages in the hose that is in the upper right corner. Remove any obstructions. Your vacuum should now operate as normal.
Internal housing routes need cleaningIn order to clean your internal housing routes you will have to access the canister.

To clean the internal housing routes follow this guide.
Screeching noise during operationBrush head is not spinningTurn the vacuum off. Look for any cord-like objects that are causing the brush to not spin. Unwrap the cord from the brush. Your vacuum should now operate as normal.
Broken brush headTo replace the brush head you will need to remove the bottom panel of your vacuum.

To replace the brush follow this guide.
Vacuum motor malfunctionReplacing the motor will require you to dismantle a majority of your vacuum.

To replace the motor follow this guide.
Filter needs cleaningRoutine filter cleaningIn order to access your filters you will need to open up your canister.

To clean your filter, follow this guide.
Vacuum will not turn onThe vacuum is not securely plugged inMake sure the plug is fully inserted into a fully functional electrical outlet. Your vacuum should now operate as normal.
The power switch is malfunctioningIn order to replace the power switch you will need to open up the handle of your vacuum.

To replace the power switch follow this guide.
The power cord need maintenanceIn order to replace the power cord you will need to open up the handle of your vacuum.

To replace the power cord follow this guide.

Error codes and troubleshooting