Do you have a broken microwave oven? Do not rush to call a specialist, if the device does not work – it does not mean that it really has become worthless. See the error codes in the table. Also in the table are possible solutions to the problem.
| Error code | Fault | Explanation/remedy |
|---|---|---|
| F.01 | Overcurrent protection tripped | Press the CLOCK button for more than 3 seconds to turn off the microwave oven. |
| Contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your specialist dealer. | ||
| F.02 | Door not closed | Close the door of the microwave oven. If the error code is still displayed, then the temperature protection is enabled. Proceed as follows: |
| Press the CLOCK button for more than 3 seconds to turn off the microwave oven. | ||
| Ensure that the product is sufficiently ventilated. | ||
| Wait at least 10 minutes before you put the microwave oven back into operation. | ||
| If the error code continues to be displayed, contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your specialist dealer. | ||
| F.03 | Internal voltage supply default | Press the CLOCK button for more than 3 seconds to turn off the microwave oven. |
| Contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your specialist dealer. | ||
| F.04 | Low-voltage protection tripped | The display shows the (!) symbol and ERROR and the current voltage is displayed. You hear 2 signal tones at an interval of one second. After 10 seconds, the microwave oven switches off. |
| Check the charge state of the vehicle battery. | ||
| If necessary, start the vehicle engine to charge the vehicle battery. | ||
| F.05 | Overvoltage protection tripped | The display shows the (!) symbol and ERROR and the current voltage is displayed. You hear 2 signal tones at an interval of one second. After 10 seconds, the microwave oven switches off. There is a fault in the 24 V on-board supply. |
| If necessary, turn off the vehicle engine. | ||
| Turn the microwave oven on again. | ||
| If the error code is still displayed, then contact your vehicle dealer or a workshop. | ||
| F.06 | Overheating of the electronics | Press the CLOCK button for more than 3 seconds to turn off the microwave oven. |
| Wait at least 30 minutes before you put the microwave oven back into operation. | ||
| If the error code continues to be displayed, contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your specialist dealer. | ||
| F.07 | Fan fault | Press the CLOCK button for more than 3 seconds to turn off the microwave oven. |
| F.08 | Microwave antenna fault | If the error code continues to be displayed contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your specialist dealer. |
| F.09 | Internal communication fault |
