Whirlpool oven troubleshooting

Ovens confidently occupied a place of honor in our kitchens. They save time for food warming, time for washing of dishes, because one can warm food on a plate. Repairs and maintenance service of a oven are an integral part of life of any technical and electric appliance. The troubleshooting table with error codes for whirlpool ovens below contributes to the revelation of the most often found malfunctions and defects.

Whirlpool RMC series oven troubleshooting

PROBLEMCAUSE
The oven will not operate• You have not set the electronic control correctly.
• You have accidentally set the control lock.
• You have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
The Self-Cleaning cycle will not operate• You did not press the Start/Enter pad.
• You have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
Display is blank• You have set the display not to show the clock time. To see the clock time again, press and hold the Clock pad for 5 seconds.
Cooking results are not what you expected• The oven is not level.
• The oven temperature seems too low or too high.
• You did not preheat the oven before baking (if called for in recipe).
• The recipe you are using may need to be altered to improve the taste or appearance of the food.
• You are using a pan that is not the correct type or size.
• There is not enough air space around pan when baking. Allow 1 to 2 inches (4-5 cm) of air space on all sides of pan.
The display Is showing “PF”• There has been a power failure. Reset the clock.
“F” followed by a number shows on the display• Press the Off/Cancel pad. If the code reappears, note the code and call for service.