Kitchenaid microwave error code f7
This error code signifies a problem in the inverter or magnetron tube, or both. The inverter board can be destroyed by the magnetron tube. This appears to be a design issue. If you have this problem, you are going to have to replace either the magnetron tube or inverter.
Kitchenaid microwave open close door error
If you see the error code, and the door is closed, thre must bee open circuit in the door interlock switch circuit. Switches are found inside the cooking cabinet: they are designed t catch the door once it is closed. Most likely, it is a door interlock switch problem, which requires repair or replacement of these switches.
Maybe you will need to just unplug your microwave for 1-2 minutes or so and then plug it back it. If it does not work, you are going to have to disassemble the element and check all its tiny parts. It is advisable to use professional help.
Kitchenaid microwave f2 error code
This error code indicates a keyboard failure. Reset your microwave and see if the code reappears. If it does, check and repair/replace the touch panel. If this does not work either, you will need to check, repair or replace the control board. If you are not experienced enough, use professional help.
Other error codes
The table lists the main errors with a description of the fault, which triggered the output of an error code on the display. The solution to the problem is indicated in the table opposite each error.
| What is the Error Code | Cause |
|---|---|
| DOOR or OPEN and CLOSE DOOR in display | If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. |
| Flashing or PF | There has been a power failure or the clock time has been turned off. When power is first supplied to the microwave oven, a colon ( : ) will blink in the display. |
| LOC or “L” or Padlock Icon | The Control Lock feature is ENABLED |
| SE Code | There is a problem with the Keypad (User Interface) or the associated wiring. |
| ЕОЗ | The Keypad (User Interface) reported a problem to the control board. There may be a problem with the Keypad (User Interface) or the associated wiring. |
| Е11 | The Gas Sensor reported a problem to the control board. There may be a problem with the Gas Sensor or the associated wiring. |
| Е12 | There is a problem with the Gas Sensor or the associated wiring. |
| Е13 | The oven did not pre-heat correctly. There may a problem with the Appliance Control Board or the associated wiring. |
| Е21 | The Thermal Sensor circuit reported open to the control board. There may a problem with the Thermal Sensor, the Appliance Control Board, or the associated wiring |
| Е22 | The Thermal Sensor circuit reported a short to the control board. There may a problem with the Thermal Sensor, the Appliance Control Board, or the associated wiring. |
| Е23 | The oven did not reach Pre-Heat Temperature within 30 (thirty) minutes. There may a problem with the Heater, the Appliance Control Board, or the associated wiring. |
| Е61 | The oven sensor circuit reported an open condition to the control board. There may a problem with the Sensor, the Appliance Control Board, or the associated wiring. |
| Е62 | The Oven Sensor circuit reported a shorted condition to the control board. There may a problem with the Sensor, the Appliance Control Board, or the associated wiring. |
| Е63 | |
| F1 E1 | The oven could not execute the function. There may a problem with the Relay Control Board, or the associated wiring. |
| F1 E4 | The oven could not execute the function. There may a problem with the Appliance Control Board, or the associated wiring. |
| F2 | The Keypad (User Interface) reported a problem to the control board. There may be a problem with the Keypad (User Interface) or the associated wiring. |
| F2.H1 | There may be a problem with the Vent Fan and Light Switch (located on the lower left front side panel) or the associated wiring. |
| F2.H2 | |
| F2.Q1 | There may be a problem with the User Interface (Touchpad) or the associated wiring. |
| F2E1 | There may be a problem with the User Interface / Keypad or the associated wiring. |
| F2H1 | There may be a problem with the Vent Fan and Light Switch or the associated wiring. |
| F2H2 | |
| F3.H1 | There may be a problem with the Humidity Sensor or the associated wiring. |
| F3.T1 | There may be a problem with the User Interface Thermistor or the associated wiring. |
| F3.T2 | There may be a problem with the Convection Thermistor or the associated wiring. |
| F3.T3 | There may be a problem with the Hood Temperature Thermistor or the associated wiring. |
| F3.T4 | There may be a problem with the Magnetron Temperature Thermistor or the associated wiring. |
| F3C | There may be a problem with the Cavity Temperature Thermistor or the associated wiring. |
| F3H | There may be a problem with the Humidity Thermistor or the associated wiring. |
| F4E1 | There may be a problem with the Cavity Temperature Thermistor or the associated wiring. |
| F4E4 | There may be a problem with the Humidity Thermistor or the associated wiring. |
| F4E9 | There may be a problem with the Smart Pop Control or the associated wiring. |
| F6 | The oven could not execute the function. There may a problem with the Relay Control Board, or the associated wiring. |
| F6E0 | The oven could not execute the function. There may a problem with the Appliance Control Board, or the associated wiring. |
| F7 | |
| F8E5 | The oven could not execute the function. There may a problem with the Exhaust Air Temperature Sensor, or the associated wiring. |
| F9 | The oven could not execute the function. There may a problem with the Appliance Control Board, the Relay Control Board, or the associated wiring. |
| F9.Q | The oven could not execute the function. There may a problem with the User Interface (Touch Pad) or the associated wiring. |
| F9.Q1 |