Kenmore microwave error code f9
If you see this error code on your microwave’s display, reset it. Unplug it for a couple of minutes and plug it back in. This may work if the error was caused by a glitch or power surge. If not, you will need to check the in verter. To be on the safe side, qualified technician.
Kenmore microwave error code SE
Other error codes
Before calling the service center, look in the table for the error codes for your microwave oven model. If an error message appears on the display, or the device does not work, it does not mean that it is broken.
Display | Likely Failure Condition | The technical details |
---|---|---|
F1 | Thermistor open | No heat or thermistor sensing error |
F2 | Thermistor short for cooking | No heat in 10 seconds after cooking starts |
F3 | Thermistor short after cooking | Thermistor temperature does not go down after cooking ends |
F4 | Senior open | Humidity sensor sensing error |
F5 | Damper switch sensing error |